Automatic digital tyre inflator
Application area: outdoor
Model No.: CLF-E012-OD-WP-N
* 174PSI/12bar/1200kPa output pressure make the unit a fit for almost any size automotive service facility
* Ruggesd and durable diecast aluminium enclosure for inflator head
* Fully automated, fully programmable, mico-processor controlled conversion system
* Suit for: Car, Light Truck, Bus
Net Weight: 17.5KG
Gross Weight: 21KG
Packing Size(Height*Width*Depth): 225mm*1290mm*400mm
Power Requirement:100-240Vac 50/60HZ
Operating Range: 5-174PSI/0.3-12bar/35-1200kPa
Accuracy: ±1 PS/0.07 bar/7kPa
Units of Measurement: PSI/Bar/kPa
1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose to tyre valve stem.
3. When unit "beeps" and the LCD screen flashes the target pressure, tyre inflation is complete.
4. If tyre has zero pressure, the "FILL" button must be pressed to commence inflation.
1. Auto-start inflation
2. Automatic zero drift adjustment
3. Remain at last setting
4. Comprehensive diagnostics and error reporting
5. Audible and visual end of the cycle signal indicators
6. Large backlight LCD display
7. Vandal resistant mechanical switches
8. Suits standard nitrogen bottle/Direct nitrogen supply from generator/Air compressor
9. 1 Nos.* 10M/32.8ft standard hose with single clip-on open type chuck
10. Options available:
* Stainless steel cabinet
* Additional heater
* Additional water tap
* OPS function is available
* Remove ON/OFF switch