How to operate measuring scale for car bench machine?

- Aug 21, 2018 -

How to operate measuring scale for car bench machine?


CLF measuring scale is used to repair the damaged cars. It is designed to improve the accuracy and convenience on detection and measurement.


Operating Instruction

1. When the measuring length is between 200mm and 910mm

Data showed on left side edge part of thread probe seat is the distance between thread probe and probe on the edge of ruler.

Note: Spirit bubble in the spirit level should be in the middle during measurement. Central casing and small casing inside the measuring scale should be close to the right side of big casing tightly.

blob.png

2. When the measuring length is between 910mm and 1590mm

Put the magnetic probe to the part under measuring. Screw off fixing bolt to move the central casing of measuring ruler. Data showed on large casing of main ruler is the distance between magnetic probe and probe on ruler edge.

Note: Small casing should be close to the right side of central casing tightly as the picture shows. Magnetic rotary head should be vertical to main ruler.

blob.png

   

3. When the measuring length is between 1590mm and 2250mm

Put the magnetic probe to the part under measuring. Screw off fixing bolt to move the central casing of measuring ruler. When central casing stretched to the edge, stop pin will pop out. Pull out the small casing ruler at this time. Data showed on right side of central casing is the distance between magnetic probe and probe on ruler edge.

Note: Don’t use small casing ruler until stop pin of central casing pops out. Or data showed on the right side is no longer the real distance between magnetic probe and probe on ruler edge. See picture below.

blob.png


Related Industry Knowledge

Related Products